Latest

AP80-92, 80-120 Amp 92-Pcs Non-touch Pilot Arc Plasma Cutter Consumable Set, Use for CHF-50 CHF-60 and APC-70HF

Brand: AM

Model: AP80-92

$269.00

AMICO Power Designed Professional Pilot Arc Consumables Set. After tens of thousands of times experiment and practical use, determined to maintain the best performance of the plasma torch.

Can be used in high frequency contact 80-120A following up of air plasma arc cutting machine series products, high-frequency air plasma is suitable for various brands of 80-120A following cutting machine.

Electrode and shunts made of very rare metal – chromium, can withstand extremely high temperatures, has strong durability, the duration is five times longer than other products, extremely suited for professional cutting.

Bakelite cup use the high quality, high temperature resistant material of professional production, with high mechanical strength, good insulation, heat resistance and corrosion resistance, also has the function of explosion-proof, very safe.

Plasma cutter torch roller guide use high temperature resistant material professional custom, production process is very delicate, wheel positioning is very reasonable and lubrication, Is the most high-end products all other roller guide.

Total 92-pieces of 80-120A P80 Consumables: 40-pieces Electrodes, 40-pieces Shunts, 10-pieces Bakelite cups and 2-pieces Torch Roller Guides.
New! Quick View

AP80-92, 80-120 Amp 92-Pcs Non-touch Pilot Arc Plasma Cutter Consumable Set, Use for CHF-50 CHF-60 and APC-70HF

$269.00
AP80-48, 80-120 Amp Non-touch Pilot Arc Plasma Cutter Consumable Set, Use for CHF-50 CHF-60 and APC-70HF

Brand: AM

Model: AP80-48

$149.00

AMICO Power Designed Professional Pilot Arc Consumables Set. After tens of thousands of times experiment and practical use, determined to maintain the best performance of the plasma torch.

Can be used in high frequency contact 80-120A following up of air plasma arc cutting machine series products, high-frequency air plasma is suitable for various brands of 80-120A following cutting machine.

Electrode and shunts made of very rare metal – chromium, can withstand extremely high temperatures, has strong durability, the duration is five times longer than other products, extremely suited for professional cutting.

Bakelite cup use the high quality, high temperature resistant material of professional production, with high mechanical strength, good insulation, heat resistance and corrosion resistance, also has the function of explosion-proof, very safe.

Plasma cutter torch roller guide use high temperature resistant material professional custom, production process is very delicate, wheel positioning is very reasonable and lubrication, Is the most high-end products all other roller guide.

Total 48-pieces of 80-120A P80 Consumables: 20-pieces Electrodes, 20-pieces Shunts, 6-pieces Bakelite cups and 2-pieces Torch Roller Guides.
New! Quick View

AP80-48, 80-120 Amp Non-touch Pilot Arc Plasma Cutter Consumable Set, Use for CHF-50 CHF-60 and APC-70HF

$149.00
CHF-40, 40 Amp Pilot Arc Non-touch Plasma Cutter, 3/5 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

Brand: AM

Model: CHF-40

$329.00

CHF-40 is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 15 Amp to 40 Amp Plasma Cutter Machine with advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, CHF-40 Air Plasma Cutter cuts a thickness of 3/5 in. and the max severance thickness is 4/5 in.

Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.

Can cut up to 3/5 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.

115-Volt and 230-Volt dual voltage, 50Hz/60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.

Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.

Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, Power cords extend to 700 feet still can use normally.

Specifications:

Type: Non-touch Pilot Arc Plasma Cutter

Supply Power: 115/230V, 50/60Hz, 1-Phase

Rated Input Current: 230V/25.6 Amp, 115V/37.8 Amp

Cutter Current Range: 230V/40 Amp, 115V/33 Amp

Nominal DC Open Circuit Voltage: 260V

Output Voltage: 96V

Duty Cycle104F (40c): 60% at 40 Amp

Efficiency: 85%

Power factor: 0.93

Output Terminal Type: Direct Wire

Cooling Method: Fan Air Cooled

Gas Supply: Clean Dry Oil-Free Air

Gas Pressure Range: 35 psi to 65 psi

Recommended Gas Inlet Flow: 3.5 cfm at 65 psi

Maximum Severance Cutting Thickness: 4/5 in.

Movement Speed: 9.0 in. /min.

Net Weight: 23.0 lbs.

Product Size: 17.91 x 7.87 x 13.86 in.

Package Weight: 34.2 lbs.

Shipping Size: 20.7 x 12.2 x 16.5 in.

Package Included:

AG-60/SG55 (13 ft.) Professional Pilot Arc Torch

10 Ft. 300 Amp Work Clamp Assembly

230V to 115V Power Adapter

Air Filter (Installed inside the machine)

Owner’s Manual.
New! Quick View

CHF-40, 40 Amp Pilot Arc Non-touch Plasma Cutter, 3/5 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

$329.00
CHF-50, 50 Amp Pilot Arc Non-touch Plasma Cutter, 4/5 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

Brand: AM

Model: CHF-50

$399.00

CHF-50 is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 15 Amp to 50 Amp Plasma Cutter Machine with advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, CHF-50 Air Plasma Cutter cuts a thickness of 4/5 in. and the max severance thickness is 1.0 in.

Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.

Can cut up to 4/5 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.

115-Volt and 230-Volt dual voltage, 50Hz/60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.

Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.

Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, Power cords extend to 700 feet still can use normally.

Specifications:

Type: Non-touch Pilot Arc Plasma Cutter

Supply Power: 115/230V, 50/60Hz, 1-Phase

Rated Input Current: 230V/32.2 Amp, 115V/47.3 Amp

Cutter Current Range: 230V/50 Amp, 115V/35 Amp

Nominal DC Open Circuit Voltage: 265V

Output Voltage: 100V

Duty Cycle104F (40c): 60% at 50 Amp

Efficiency: 85%

Power factor: 0.93

Output Terminal Type: Direct Wire

Cooling Method: Fan Air Cooled

Gas Supply: Clean Dry Oil-Free Air

Gas Pressure Range: 40 psi to 70 psi

Recommended Gas Inlet Flow: 4.5 cfm at 70 psi

Maximum Severance Cutting Thickness: 1.0 in.

Movement Speed: 12.0 in. /min.

Net Weight: 23.0 lbs.

Product Size: 17.91 x 7.87 x 13.86 in.

Package Weight: 35.3 lbs.

Shipping Size: 20.7 x 12.2 x 16.5 in.

Package Included:

P-80 (13 ft.) Professional Pilot Arc Torch

10 Ft. 300 Amp Work Clamp Assembly

230V to 115V Power Adapter

Air Filter (Installed inside the machine)

Owner’s Manual.
New! Quick View

CHF-50, 50 Amp Pilot Arc Non-touch Plasma Cutter, 4/5 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

$399.00
CHF-60, 60 Amp Pilot Arc Non-touch Plasma Cutter, 7/8 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

Brand: AM

Model: CHF-60

$499.00

CHF-60 is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 15 Amp to 60 Amp Plasma Cutter Machine with advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, CHF-60 Air Plasma Cutter cuts a thickness of 7/8 in. and the max severance thickness is 1.2 in.

Incorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.

Can cut up to 7/8 in. stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.

115-Volt and 230-Volt dual voltage, 50Hz/60Hz, almost all of the voltage and frequency can be used, and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.

Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve.

Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, Power cords extend to 700 feet still can use normally.

Specifications:

Type: Non-touch Pilot Arc Plasma Cutter

Supply Power: 115/230V, 50/60Hz, 1-Phase

Rated Input Current: 230V/38.8 Amp, 115V/54.0 Amp

Cutter Current Range: 230V/60 Amp, 115V/42 Amp

Nominal DC Open Circuit Voltage: 270V

Output Voltage: DC 104V

Duty Cycle104F (40c): 60% at 60 Amp

Efficiency: 85%

Power factor: 0.93

Output Terminal Type: Direct Wire

Cooling Method: Fan Air Cooled

Gas Supply: Clean Dry Oil-Free Air

Gas Pressure Range: 45 psi to 75 psi

Recommended Gas Inlet Flow: 5.5 cfm at 75 psi

Maximum Severance Cutting Thickness: 1.2 in.

Movement Speed: 15.0 in. /min.

Net Weight: 23.1 lbs.

Product Size: 17.91 x 7.87 x 13.86 in.

Package Weight: 37.1 lbs.

Shipping Size: 20.7 x 12.2 x 16.5 in.

Package Included:

P-80 (13 ft.) Professional Pilot Arc Torch

10 Ft. 300 Amp Work Clamp Assembly

230V to 115V Power Adapter

Air Filter (Installed inside the machine)

Owner’s Manual.
New! Quick View

CHF-60, 60 Amp Pilot Arc Non-touch Plasma Cutter, 7/8 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

$499.00

Shopping Cart

Your shopping cart is empty!

Continue

satisfaction
100% Guaranteed

Free shipping
on orders over $99

7 Day
Easy return

AP80-92, 80-120 Amp 92-Pcs Non-touch Pilot Arc Plasma Cutter Consumable Set, Use for CHF-50 CHF-60 and APC-70HF

AP80-48, 80-120 Amp Non-touch Pilot Arc Plasma Cutter Consumable Set, Use for CHF-50 CHF-60 and APC-70HF

CHF-40, 40 Amp Pilot Arc Non-touch Plasma Cutter, 3/5 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

CHF-50, 50 Amp Pilot Arc Non-touch Plasma Cutter, 4/5 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

CHF-60, 60 Amp Pilot Arc Non-touch Plasma Cutter, 7/8 in. Clean Cut, 115/230V Dual Voltage Cutting Machine

Shopping Cart